Current market available range hood type, range, but the vast majority or "top-suction range hood", that is installed directly above the gas cooker. Top-suction range hood can always adhere to the "overlord" status, what are the benefits of it?
Comply with the national installation standards
1999 the GB4706.28-safety of household and similar electrical appliances-particular requirements for range hoods, expressly provided for in article 7.12.1: stove cooking utensils of seatings and range hood minimum part of the minimum distance, if range hood above the gas stove is installed in, the distance should be at least 65CM.
Range hood installation height is not enough, not only would cause inconvenience to the cooking, such as the steamer, steam cookers almost directly into the air intake range hood. At the same time as the range hood installation height too low may be inhaled the gas burner range hood of the open fire, causing a safety hazard.
No loss of heat energy to burn more fully
Top-suction range hood installation height are in line with national standards in use does not interfere with the normal operation of the gas cooker. If the range hood installation height too low, the distance between the gas burner too close, it is easy to cause the loss of heat energy fuel gas stove, and because the suction range hood too close together, causing local air supply thinner, the combustion is not sufficient, not only wastes gas and causes environmental pollution.
In line with the principle of air convection, smoother hoods
Regardless of the farmhouse of the chimney or flue pipes of the modern kitchen, the trend is up, why? because hot smoke only to rise in air convection process, heat is always to rise, according to this logic, range hood, gas cooker should be installed in order to make the heat in the upper part and fume exhaust as soon as possible.
Double inlet, better absorb fumes
General gas range into two bulk heads, it is necessary to range hood has two inlet to the corresponding fuel gas stove two bulk heads to better absorb smoke effect. Sakura full range hood products are top-suction and the introduction of the "double inlet" designed to correspond with the gas stove stove set of two, which is equal to the expanded range hood inlet negative pressure zones around, when oil rises, more rapidly and more fully absorb fumes so that fume exhaust outside.
Double oil NET, lampblack better separation effect
The so-called oil separation, is through the filter, enter in the fume hood internal isolation, before smoke and smoke emission after the separation in order to protect the indoor and outdoor environment clean; will cut in external oil range hood to protect range hood performance and life.
Cherry oil separation technology has a 32-year history, it is through a special "double the oil net" structure to implement the lampblack, inner layer oil screen will oil separation, outer leads the oil column will be detached oil drop import set oil Cup. In the successfully developed "double the oil net" structure, Sakura research team concluded that after repeated authentication: when the oil screen of mesh diameter 0.2cm, tilt to 38 °, can be better for oil separation; import oil column of density levels for the equal division of 72 root, tilt to 38 °, better diversion oil drops.
No comments:
Post a Comment